
Insulation removal and replacement that takes out fallen, wet or ineffective crawl space insulation and installs new insulation with proper supports and seals.
Fiberglass batts under a floor are held up by thin wires or friction, and over time they sag, fall or get soaked by humidity. Once insulation hangs away from the floor it does little, and it can also block airflow or trap moisture against wood. Homeowners in Nashville often look into the crawl space and see batts lying on the ground.
We remove the old insulation, bag it and inspect the exposed floor framing and subfloor for moisture, rot, mold and pests. We repair what we find, air-seal the rim joist and penetrations and install new insulation that fits snugly with proper supports, or switch to foam on the walls in a sealed plan. We explain the options and costs in plain terms, including the value of fixing humidity first, and we show you before and after photos. If the old insulation shows mold or heavy contamination, we use the cleanup methods described on our related pages.
Old batts are bagged and removed, and the floor system is vacuumed and inspected.
Damage is repaired, and the rim joist and penetrations are air-sealed before new insulation goes in.
New batts, foam or wall insulation are installed to fit tightly with supports that last.
Photos before and after show what was found and what was done.
Drag the handle to compare.

BeforeAfterA clean start.
Inspection after removal.
Better results.
Tight and supported.
For sealed plans.
Before and after.
Every topic has its own page with what to expect and how we approach it.
Comparison guideInsulation OptionsHow fiberglass batts, mineral wool, rigid foam board and spray foam differ for crawl space floors and walls…Learn more
Comparison guideMold Causes and CleanupWhy mold grows under houses, how moisture, wood and time combine, what safe cleanup involves and how to…Learn more
ResourceOwens CorningA maker of building materials including insulation, roofing and composites, with product guides for homes.Learn more Enter the length, width and wall height of your crawl space to see floor and wall areas, liner and tape amounts, foam boards, drain length, posts and a dehumidifier range.
You tell us what you notice, from smells and cold floors to water and sagging, and we ask about the home and past work.
We enter the space, take moisture readings and photos, measure it and look at drainage outside.
You get a plain written scope with priorities, materials, schedule and options before anything is ordered.
We clear debris, repair structure and install drainage, then dry the space to safe moisture levels.
A liner, sealed vents, insulation and a dehumidifier go in, with seams taped and checked.
We walk the finished space with you, leave a care guide and photos and set a first checkup.
When it is fallen, wet, moldy, soiled or no longer touching the floor.
It can work in a dry vented space with proper supports and air sealing.
Not always. Walls with foam suit sealed spaces, and batts can suit vented ones.
Often a day or two for typical homes.
Proper supports and dry conditions greatly reduce the chance.
Crawl Space InsulationCrawl space insulation for floors or foundation walls, chosen to suit a sealed or vented space, to keep…Explore
Insulation RemovalOld insulation and contaminant removal that takes out sagging, wet, moldy or animal-soiled insulation and cleans the space…Explore
Spray Foam InsulationSpray foam insulation for crawl space walls, rim joists and floors that insulates and air-seals in one step…Explore
Underfloor BattsUnderfloor batt insulation that installs new, properly supported fiberglass or mineral wool batts between floor joists in vented…Explore Tell us about your space and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.