Thermal Imaging and Energy Assessment in Nashville and Middle Tennessee
Inspections and Testing

Thermal Imaging and Energy Assessment

A thermal imaging and energy assessment that uses an infrared camera to find missing insulation, air leaks and cold wet spots that raise bills and cool floors.

A thermal camera turns invisible temperature differences into a picture. Under a floor it can show where insulation has fallen, where air leaks in and where damp materials are colder than the rest. Homeowners in Nashville who feel cold floors in winter or see high summer cooling bills often find the cause hiding under the house.

We scan the crawl space ceiling, rim joist and walls and the floors above, and we pair the images with moisture readings so a cold spot is not mistaken for a wet one. We mark gaps in insulation, leaky rim joists, uninsulated ducts and pipe penetrations and explain how each affects comfort and energy use. We keep the language honest: a camera shows temperature, not savings, so we explain likely improvements without promising numbers and recommend sealing before insulating where that makes more sense.

Scanning

We scan floors, walls, the rim joist and ducts and record the images with locations.

Pairing with moisture

We confirm cold spots with readings so we know whether the cause is missing insulation, air movement or dampness.

Findings

We show you each image and explain what it means in plain words.

Improvement plan

We suggest sealing, insulation and duct fixes in a sensible order and avoid promising specific savings.

What is included

  • Infrared floor and wall scan
  • Image labeling by location
  • Moisture cross-checks
  • Insulation gap map
  • Air leak locations
  • Improvement plan
Before and after

See the transformation.

Drag the handle to compare.

After: a crawl space with a white sealed liner on the floor and walls, clean joists and a dehumidifierBefore: a crawl space with a dirt floor, torn plastic, sagging insulation and wet patchesBeforeAfter
A damp, open crawl space, then a clean encapsulated one. From a dirt floor, torn plastic, sagging insulation and wet patches to a white sealed liner on the floor and walls, clean joists and a dehumidifier.
Why it works

What you get with Thermal Imaging

Infrared images

Temperature differences made visible.

Moisture paired

Cold is not always wet, so we check.

Gap mapping

Missing insulation and leaks marked.

Comfort link

Cold floors tied to causes.

Sensible order

Seal first, insulate second.

No savings promises

Honest, practical advice.

How it works

Our process, start to finish.

  1. 01

    Call and describe the problem

    You tell us what you notice, from smells and cold floors to water and sagging, and we ask about the home and past work.

  2. 02

    Inspect and measure

    We enter the space, take moisture readings and photos, measure it and look at drainage outside.

  3. 03

    Review the estimate

    You get a plain written scope with priorities, materials, schedule and options before anything is ordered.

  4. 04

    Clean, repair and drain

    We clear debris, repair structure and install drainage, then dry the space to safe moisture levels.

  5. 05

    Seal and equip

    A liner, sealed vents, insulation and a dehumidifier go in, with seams taped and checked.

  6. 06

    Walk through and care

    We walk the finished space with you, leave a care guide and photos and set a first checkup.

Questions

Thermal Imaging FAQ

Does a thermal camera find leaks?

It can show where water or air is moving, and we confirm with moisture readings.

Will this lower my bills?

Improvements can help comfort and energy use, but we do not promise specific savings.

Do I need to wait for a certain season?

Temperature differences help, so cooler and hotter days give clearer images, but we can scan any day.

Do you do whole-house energy audits?

We focus on the crawl space and floors. A separate energy rater can assess the rest of the house.

What improves a cold floor?

Air sealing, insulation and sometimes ducts and moisture control, depending on what we find.

Next step

Get your Free Crawl Space Estimate for Thermal Imaging.

Tell us about your space and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your crawl space

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate